All Slide X 300 Technical Data

Overall Size	20" x 22" 500 x 558mm
X Axis Travel	12" / 300mm
Y Axis Travel	9" / 228mm
Feedrate	150 IPM Linear
Table size	6.0" x 14.5"
Hold down provision	1/4-20 Tapped holes on 1.0" centers
Drive Mechanism	15mm Ball screws and 4 THK Linear Slides with "Caged-Ball" technology on each axis
Software	Mach 3 Windows Based, ISO G&M Code - Minitech CNC
Controller	1/10 micro stepping. Parallel port interfacing with up to 45000Hz bits per second kernel speed
Motors	Nema 24 High Torque
Resolution	0.0001" / .0025mm
Power Requirements	115VAC, 60 Hz --110 or 220 VAC, 50 Hz

Installation

1, Clamp All Slide to Table of Milling Machine....or other device

2, Connect Stepper Motors Cables to Power Supply

3, Connect Power Supply to Computer

4, Load Program and Run